Properly and simply designed, widely used;Oil offering system is an energy waste and time waste set in mechanical design. There is no needs for considering the oil-putting set in design when using the solid lubricant bushing.
Traditional mechanical design ask for frequently aiding oil and checking if the oil watch and the offering set are through in certain period. Because adding oil at regular intervals causes the pollution to the machine itself and the nearby surroundings and increase the maintenance cost.
With superior chemical resistance and corrosion resistance.The lubricant of the solid-lubricant. inlaid bushing is made of special graphite and PTFE. It has steady molecule structures.

Part B . Product Operation

The sliding surface becomes black or black gray after operation due to the film of special solid lubricant. This is normal, do not remove film by wiping.
Usable in seawater.
Has superior heat resistance.

Part C. Product Application

Demonstrates high performance under high-load and low-speed operations.
Self-lubricating bearing with embedded solid lubricant and metal base that conforms to the universally-acknowledged ASTM Standards (C86300).
Serviceable without the need for lubrication.

Sliding Characteristics(Lubricating condition : No lubrication)
Mating Material	Hardened Surface with HRC25 or More			Heat Treated Steel or FC Casting Less than HRC25			Raw Material (SS400)
Mating Material	P (surface pressure)	V (sliding speed)	PV value	P (surface pressure)	V (sliding speed)	PV value	P (surface pressure)	V (sliding speed)	PV value
Wear plate	N/mm2	m/min		N/mm2	m/min		N/mm2	m/min
FC Type	5	10	30	5	10	30	5	10	30
Sintered Type	50	30	100	25	30	60	25	30	50
Bronze Type	100	15	150	50	15	150	25	15	150

Inquiry Cart 0