Properly and simply designed, widely used;Oil offering system is an energy waste and time waste set in mechanical design. There is no needs for considering the oil-putting set in design when using the solid lubricant bushing.
Use special graphite that has good self-lubricant properties as lubricant to make

out the self-lubricant so that the bushing has included all of their advantages.
This wear resistance can be brought into play even in places the oil film form into difficulties because of the reciprocating and rocking movement, starting and stopping

Part B . Product Operation

The sliding surface becomes black or black gray after operation due to the film of special solid lubricant. This is normal, do not remove film by wiping.
Demonstrates superior wear resistance in applications where oil film is seldom
When a die is reused after storage for a long time, the sliding surface may have rust. Clean the sliding surface and apply grease to the surface.

Part C. Product Application

Demonstrates high performance under high-load and low-speed operations.
Self-lubricating bearing with embedded solid lubricant and metal base that conforms to the universally-acknowledged ASTM Standards (C86300).
Serviceable without the need for lubrication.

Types of Wear Plates
Material		Thickness	Code No.	Feautures
Base Metal	Oilless Type
FC250	Graphite	20	SESF	Excellent sliding performance at low load and medium speed.
		20	SESFT
SS400	Copper Powder sintering	20	SOX	Excellent sliding performance at low / medium load and medium speed.With the sintered layer using copper based powder and graphite, occurrence of seizure is very limited.
		20	SOXT
S45C		10	TWX
		10	TWXT
Copper alloy	Graphite	20	SESW	Excellent in load resistance and wearExcellent sliding performance at high load and low speed.resistance. Good performance is shown in reciprocating and frequent starts and stops.
		20	SESWT
		10	TWP
		10	TWPT
		5	UWP
Steel (S45C)	Graphite	20	FRP	Since the surface hardness is HRC40 or more, it is excellent in wear resistance.
Steel (SKS3)		20	TSP	Since the surface hardness is HRC58 or more, it is greatly excellent in wear resistance.

Inquiry Cart 0