Type	Straight	Bushing Material	Graphite Impregnated Brass
I.D. d(mm)	6	O.D. D(mm)	10
Maximum Allowable PV Value(N/mm2•m/s)	1.65	Maximum Allowable Load(N/mm2)	29
Operating Temperature Range(℃)	-40~150	Operating Temperature Range (No Lubrication) Min	-40

Part A. Product Features

Use special graphite that has good self-lubricant properties as lubricant to make out the self-lubricant so that the bushing has included all of their advantages.
Being used without oil and self-lubricating. Because of the linear coefficient expansion of the solid lubricant is bigger than that of the metal basement.
when the solid-lubricant-inlaid bushing starts to operate,the oil film can transfer to the corresponding friction set to make out self-lubricant.

Part B . Product Operation

Demonstrates high performance under high-load and low-speed operations.
Apply a small amount of grease for initial lubrication in die spotting.
produced such as reciprocating motions, oscillation, frequent starts and stops, etc

Part C. Product Application

Demonstrates high performance under high-load and low-speed operations.
Self-lubricating bearing with embedded solid lubricant and metal base that conforms to the universally-acknowledged ASTM Standards (C86300).
Serviceable without the need for lubrication.

Inquiry Cart 0