Zhejiang In-way Precision Machinery Co., Ltd
Zhejiang In-way Precision Machinery Co., Ltd
Add to Cart
DIN9834 / ISO9448 guide bushing, european standard, SO#50SP2 with graphite
DIN 9834,DIN 9448 Bronze Collar Guide bush
Huge Stocks
Material: Bronze with solid lubricant, oilless lubricating
| Type | Straight | Bushing Material | Graphite Impregnated Brass |
|---|---|---|---|
| I.D. d(mm) | 6 | O.D. D(mm) | 10 |
| Overall Length L(mm) | 10 | Maximum Allowable PV Value Range(N/mm2•m/s) | 1.1~2.0 |
| Maximum Allowable PV Value(N/mm2•m/s) | 1.65 | Maximum Allowable Load(N/mm2) | 29 |
| Maximum Allowable Velocity(m/s) | 0.5 | Mounting Hole Fits | H7 |
| Operating Temperature Range(℃) | -40~150 | Operating Temperature Range (No Lubrication) Min | -40 |
Advantage
1. Total Self-Lubricating:No oil or grease required
The self-lubricating features allow bearings to be used where oiling is difficult, expensive to implement, and where grease/oil cannot be used. Excellent lubrication is achieved even under high loads at low speeds.
2. Excellent Wear Resistance:
Excellent wear resistance is achieved under severe working conditions, such as heavy load, low velocity, reciprocating, oscillating and intermittent motions where the formation of oil film is difficult.
3. Low Coefficient of Friction: 0.04 to 0.2 typical:
Self-lubrication with specially embedded solid lubricants reduces friction.
4. Wide Operating Temperature Ranges: -40 °C to +300 °C
Superior performance is exhibited under high and low temperature conditions.
5. Corrosion and Chemical Resistance:
Performance is not affected by water and caustic chemicals.
6. Designed to Exceed Your Requirements:
High precision products with close tolerances.
7. Cost Competitive:
Maintenance, replacement, and end-item downtime cost reduced due to the exceptional service life compared to similar self-lubricating products.
Catalog No.(Type) d D1 L1 t r X(DIN 509)
9834-025 (11)
9834-032 (12)
9834-040 (13)
9834-050 (14)
9834-063 (15)
9834-080 (16)
9834-100 (17)
9834-125 (18)
9834-160 (20)