CuAl10Fe3 Cast Bronze Bushings With Oil Groove Outside Surface Sleeve Type

CuAl10Fe3 Cast Bronze Bushings With Oil Groove Outside Surface Sleeve Type

Gerneral Technical Inforamtion :

CuAl10Fe3 – UNS.C62300 Aluminum Bronze Alloys, which recommended for medium-duty applications involving wear and fatigue, especially where high ductility is required for cold working, C62300 and C62400 aluminum bronze applications include valve and pump components for industrial process streams, as well as for marine equipment, high strength fasteners and pole line hardware.

Typical Application for C62300 Aluminum Bronze Alloys
Fasteners: Nuts, Bolts
Industrial: Cams, Bushings, Bearing retainer Cages, Gears, Bearing Races, Valve Stems, Worm Gears, Valve Guides, Valve Seats, Bearing, Pump Rods, sleeve bearings
Marine: Marine Hardware
Available Sizes:
Custom Diameter & Sizes, Random Mill lengths

Available Products (forms):
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars
Custom shapes are available upon request.

Chemical Composition:

Al: 8.50-10.00%
Fe: 2.00-4.00%
Mn: 0.50% Max.
Ni: 1.00% Max.
Si: 0.25% Max.
Sn: 0.60% Max.
Cu: Balance
Note: Copper plus additions equal 99.50% minimum.

Typical Physical Properties:

Specific Gravity: 7.70 g/cm3
Coefficient of Thermal Expansion per °C: 16.20 x 10-6 (20-300°C)
Electrical Conductivity (% IACS): 12 % @ 68 F
Thermal Conductivity: 31.0 Btu · ft/(hr · ft2·oF)at 68F
Modulus of Elasticity in tension: 17000 ksi

Fabrication Properties

INW-62 Carsting Alloy Bronze applied with new and improved cooper alloys manufactured in our own foundry is what we see to be one of the key foundations of our compa­ny's success story. We cooper­ate closely with institutes of universities, research institutes and cus tomers to tailor the performance of our products to the application requirements

4. Flanged bushes

5. Thrust washers

6. Sliding plates

7. We accept of the available datasheet with detaied information about metaial characteristics adn design information .