Zhejiang In-way Precision Machinery Co., Ltd
Zhejiang In-way Precision Machinery Co., Ltd
Add to Cart
Small Brass Bushings CuAl10Fe5Ni5 Straight Oil Groove Copper Based
Gerneral Technical Inforamtion :
EN 1982 CC333G
CuAl10Fe5Ni5-C
| % min. | % máx | |
|---|---|---|
| Al | 8,5 | 10,5 |
| Cu | 76,0 | 83,0 |
| Fe | 4,0 | 5,5 |
| Mn | 3,0 | |
| Ni | 4,0 | 6,0 |
| Bi | 0,01 | |
| Cr | 0,05 | |
| Mg | 0,05 | |
| Pb | 0,03 | |
| Si | 0,01 | |
| Sn | 0,01 | |
| Zn | 0,50 |
| Proceso de moldeo y designación | Continuous (GC)1 | Centrifugal (GZ) |
|---|---|---|
| Tensile Strength Rm (MPa) | 650 | 650 |
| Yield Point 0,2% Rp0,2 (MPa) | 280 | 280 |
| Elongation 5D A (%) | 13 | 13 |
| HBW (10-1000) | 150 | 150 |
| Density kg/dm3 | 7,6 |
|---|---|
| Specific Heat j/g. k | 0,418 |
| Thermal Expansion 10-6 k | 17 a 19 |
| Thermal Conductivity W/m. ºk | 60 |
| Electrical Conductivity m / (Ohm.mm2) | 4 a 6 |
Fabrication Properties
INW-62 Carsting Alloy Bronze applied with new and improved cooper alloys manufactured in our own foundry is what we see to be one of the key foundations of our company's success story. We cooperate closely with institutes of universities, research institutes and cus tomers to tailor the performance of our products to the application requirements
4. Flanged bushes
5. Thrust washers
6. Sliding plates
7. We accept of the available datasheet with detaied information about metaial characteristics adn design information .
